WHAT WE DO

Any metal components exposed to electrical, chemical, or otherwise harsh environments will corrode or deteriorate with time if not adequately protected. The result can be a loss in efficiency, downtime, and/or costly repairs.

About Quality Precision Coatings

Originally founded in 1977, Quality Precision Coatings, LLC (formerly Techni-Kote, Inc.) applies baked coatings on items such as piping, sub-sea well control actuators, valve actuators, down hole equipment, and provers as well as air dry or catalyst cured coating applied to skids, piping, blow out preventers, ball valves, gate valves, and well control equipment.

Capabilities

Area: 20 acres

Outside storage is available for preprocess and post processed orders.

Buildings and Covered work areas make up 80,000 sq ft with 20’ eves.

  • 2 enclosed blast cleaning rooms 25’ x 50’ each.
  • 1 enclosed blast cleaning room 20’ x 20’ 
  • 14 paint booths 
  • 1 enclosed blast cleaning room 60 x 20 x 18

Automated blasting and coating equipment available for piping 2″ through 24″ by 40′ long. 

 
Ovens: chart controlled and certified
  • 10’ x 10’ x 50’long, 650°F capacity 
  • 8’ x 8’ x 15’ long, 600°F capacity 
  • Burn out oven 
  • 3 mobile 700° ovens 

Lift Capacity to 55,000 lbs. Cranes available for larger parts.

Diameter Capacity:
  • ½” ID to 6’ ID x 40’ internal baked coatings, xylans and other coatings.
  • 4’ ID to 5’ ID x 50’ internal baked coatings, xylans and other coatings.
 
Tank Capacities Baked Linings:
  • 15’ diameter internal x 50’ long
  • Fork-lift capabilities to 50,000 lbs.

On staff NACE Certified Coating Inspectors.

Complete Project Traceability.

Techni-Kote applies baked coatings on items such as piping, sub-sea well control actuators, valve actuators, down hole components, and provers.

Zincs, epoxy and urethane coating on skids, piping, blow out preventer, ball valves, gate valves and well control equipment.

Services

Coatings

These are the most common coatings we apply. If you have a need for a coating not listed below, please contact us to see if we can help meet your needs.

  • PA-400 Epoxy Phenolic
  • HTP3 High Temp
  • Phenolic
  • PA505 FBE
  • IPC800 FBE
  • Scotch Kote 134 FBE
  • Ameron
  • Carboline
  • Ceil-Coat
  • Ceram-Kote
  • Devoe
  • Dupont Powder Coatings
  • Flex-Kote
  • Heresite
  • International Coatings
  • Jotsun
  • Plasite Protective Coatings
  • 3070 Baked Phenolics
  • Product Techniques
  • 3M Powder Coatings
  • Valspar Powder Coatings
  • Sherwin Williams
  • Sigma
  • U.S. Coatings
  • Xylan PTFE Products
  • Polyurea Coatings

Blast Cleaning

Quality Precision Coatings can meet the requirements for white metal blast cleaning of steel surfaces by the use of abrasives. Also any and all procedures before blast cleaning, blast cleaning methods and operation, blast cleaning abrasives, procedures following blast cleaning, inspection, and safety and environmental requirements. 

The five levels and their standard documents are listed in the table below.

Level name                  Standard

White Metal                 NACE No. 1/SSPC-SP 5
Near-White Metal         NACE No. 2/SSPC-SP 10
Commercial                  NACE No. 3/SSPC-SP 6
Industrial                      NACE No. 8/SSPC-SP 14
Brush Off                      NACE No. 4/SSPC-SP 7

 

Photo Gallery

The aesthetic and beauty of your final product are built into our technical process. Take a moment to review some of our previous projects. 

CONTACT US